920-921-6404

Press Release

Model 950 Tool Shank Flat Grinder

Posted on January 13, 2024

The Winslow Engineering Model 950 Tool Shank Flat Grinder was designed and built by Winslow Engineering. A cutting tool manufacturer came to us to see if we would be able to build a machine to grind three symmetrical flats at...

Read the article

Winslow Engineering Can Rebuild or Recondition your Cutting Tool Inspection System

Posted on January 5, 2024

Winslow Engineering can clean, repair, or rebuild your Cutting Tool Inspection 550 & 560 Tool Analyzers. Often times the optics are dirty and require cleaning or slides may be loose and require tightening. Contact Winslow...

Read the article

Tap End Grinder

Posted on November 9, 2023

We designed and built a machine for grinding the ends of taps. It is an automatic machine. It requires only manual loading of the taps. The operator selects the tap size on the operator interface, loads the taps either in the...

Read the article

Winslow Model HR Drill Grinder Motions

Posted on September 26, 2023

The Winslow Engineering HR Drill Point Grinder's grinding cycle motions! The Winslow Model HR Drill Point Grinder. It is capable of grinding HSS and carbide drills in the size range of 1/6" - 1 1/2" (1.55mm - 38mm) diameter. It...

Read the article

530 Benchtop Drill Point Splitter

Posted on August 30, 2023

Why split your drills by hand when you can use our 530 Benchtop Drill Point Splitter to obtain a consistent quality split on drills in the size range from 1/8" - 1/2" (3 - 13 mm) diameters. The Model 530 can split HSS and carbide...

Read the article

Winslow Engineering's 560 PA Cutting Tool Inspection

Posted on May 4, 2023

Do you have a need to inspect parts in your CNC Tool & Cutter Grinder rather than taking them out, loosing your setup and walking to the inspection department? Contact Winslow Engineering for information on our 560 PA Video...

Read the article

Why send your Drills out for Resharpening?

Posted on September 13, 2022

Why send your used drills out for resharpening? Keep the work in house to control quality and timely return of the resharpened drills.This is our rebuilt semi-automated Winslow Model HC Drill Point Grinder. It is capable of grinding...

Read the article

The "NEW" Winslow Engineering Model 560G Cutting Tool Inspection System

Posted on July 6, 2022

Our new low cost Model 560G Video Tool & Part Analyzer permits rapid precise inspection of all tool/part geometry characteristics in new tool, tool regrind, and part manufacturing. The 560G vision system uses a series of lenses...

Read the article

The New "Robot AutoInspect" Cutting Tool Inspection

Posted on April 27, 2022

The "NEW" Winslow Engineering Robot AutoInspect Cutting Tool Inspection System was first shown to customers at Eastec 2019 in West Springfield, MA. The Robot AutoInspect Cutting Tool Inspection System was programmed to remove...

Read the article

Model 560C Cutting Tool Inspection

Posted on April 9, 2022

This is our Model 560C Video Tool Analyzer. You are able to import .dxf Cad files for comparison purposes with your cutting tools, create .dxf files for reverse engineering, save and email images with the inspection data attached,...

Read the article