Press Release
Winslow Model HR Drill Grinder Motions
Posted on October 22, 2020
The Winslow Engineering HR Drill Point Grinder's grinding cycle motions! The Winslow Model HR Drill Point Grinder. It is capable of grinding HSS and carbide drills in the size range of 1/6" - 1 1/2" (1.55mm - 38mm) diameter. It...
Nurse Server
Posted on October 16, 2020
We were asked by a hospital to design and build a Nurse Server System for their patient rooms. The Winslow Engineering Nurse Server/Patient Server allows you to organize and store patient room supplies right where you need them,...
Winslow Engineering Model 525 Drill Point Splitter
Posted on October 7, 2020
This is Winslow Engineerings Model 525 Drill Point Splitter. It can split and web thin HSS and carbide drills to NAS 907 specifications. It is capable of splitting upwards of 300 of a 5/16" (8mm) diameter drill per hour. The capacity...
Winslow Engineering Can Rebuild or Recondition your Cutting Tool Inspection System
Posted on September 28, 2020
Winslow Engineering can clean, repair, or rebuild your Cutting Tool Inspection 550 & 560 Tool Analyzers. Often times the optics are dirty and require cleaning or slides may be loose and require tightening. Contact Winslow...
Used Model HC Drill Point Grinder
Posted on August 27, 2020
Why send your used drills out for resharpening? Keep the work in house to control quality and timely return of the resharpened drills. This is our used low cost semi-automated Winslow Model HC Drill Point Grinder. It is capable...
560 IPI
Posted on August 18, 2020
The Winslow Engineering Model 560 IPI(In-Process-Inspection), provides the capability of monitoring or inspecting a part during the grinding process. The optics and X-Y-Z axes are encased in a sealed box to keep grinding grit...
Rebuilt 100C Drill Point Grinder
Posted on August 12, 2020
This is our stock rebuilt 100C Drill Point Grinder that is for sale. We start with a used machine, tear it down and bring it back to as close to a new condition as we can. We replace bearings, switches, solenoid valves, pumps,...
530 Benchtop Drill Point Splitter
Posted on July 28, 2020
Why split your drills by hand when you can use our 530 Benchtop Drill Point Splitter to obtain a consistent quality split on drills in the size range from 1/8" - 1/2" (3 - 13 mm) diameters. The Model 530 can split HSS and carbide...
Rebuilding or Service Support for your Winslow Drill Point Grinders
Posted on July 2, 2020
Are you in need for service support on your Winslow Drill Point Grinder? In these uncertain times, rather than having us come to your facility you can ship your machine to our facility where we can go through it from top to bottom,...