Press Release
AccuTool Tool Analyzer
Posted on October 10, 2024
We have a customer that has an AccuTool Tool Analyzer that is no longer supported by the manufacturer. Starting the computer was hit and miss and as a result, not reliable. They asked us if we could look at it and see if we could...
Tap End Grinder
Posted on October 10, 2024
We designed and built a machine for grinding the ends of taps. It is an automatic machine. It requires only manual loading of the taps. The operator selects the tap size on the operator interface, loads the taps either in the...
Winslow Model HR Drill Grinder Motions
Posted on August 20, 2024
The Winslow Engineering HR Drill Point Grinder's grinding cycle motions! The Winslow Model HR Drill Point Grinder. It is capable of grinding HSS and carbide drills in the size range of 1/6" - 1 1/2" (1.55mm - 38mm) diameter. It...
Model 560C Cutting Tool Inspection
Posted on July 1, 2024
This is our Model 560C Video Tool Analyzer. You are able to import .dxf Cad files for comparison purposes with your cutting tools, create .dxf files for reverse engineering, save and email images with the inspection data attached,...
The New "Robot AutoInspect" Cutting Tool Inspection
Posted on May 29, 2024
The "NEW" Winslow Engineering Robot AutoInspect Cutting Tool Inspection System was first shown to customers at Eastec 2019 in West Springfield, MA. The Robot AutoInspect Cutting Tool Inspection System was programmed to remove...
The "NEW" Winslow Engineering Model 560G Cutting Tool Inspection System
Posted on May 29, 2024
Our new low cost Model 560G Video Tool & Part Analyzer permits rapid precise inspection of all tool/part geometry characteristics in new tool, tool regrind, and part manufacturing. The 560G vision system uses a series of lenses...
Rebuilding of your old Winslow Drill Point Grinders and Splitters
Posted on April 15, 2024
Winslow Engineering can rebuild your old Winslow Drill Point Grinders or Drill Point Splitters? They may have names like Winslomatics, Exactamatic, HC 101, 100B, G&L or Giddings & Lewis Drill Bit Sharpeners, also called...
Model 950 Tool Shank Flat Grinder
Posted on January 13, 2024
The Winslow Engineering Model 950 Tool Shank Flat Grinder was designed and built by Winslow Engineering. A cutting tool manufacturer came to us to see if we would be able to build a machine to grind three symmetrical flats at...
Winslow Engineering Can Rebuild or Recondition your Cutting Tool Inspection System
Posted on January 5, 2024
Winslow Engineering can clean, repair, or rebuild your Cutting Tool Inspection 550 & 560 Tool Analyzers. Often times the optics are dirty and require cleaning or slides may be loose and require tightening. Contact Winslow...
530 Benchtop Drill Point Splitter
Posted on August 30, 2023
Why split your drills by hand when you can use our 530 Benchtop Drill Point Splitter to obtain a consistent quality split on drills in the size range from 1/8" - 1/2" (3 - 13 mm) diameters. The Model 530 can split HSS and carbide...
Categories