Embedded Files
We have a customer that has an AccuTool Tool Analyzer that is no longer supported by the manufacturer. Starting the computer was hit and miss and as a result, not reliable. They asked us if we could look at it and see if we could get it operational for them. We installed a new computer and set it up with our inspection software. We were able to get it up and operational at a fraction of the cost of a new Tool Analyzer. Contact Winslow Engineering if you are having problems with your AccuTool Tool Analyzer as we maybe able to offer assistance.
We designed and built a machine for grinding the ends of taps. It is an automatic machine. It requires only manual loading of the taps. The operator selects the tap size on the operator interface, loads the taps either in the hopper or on the walking track. There are 3 stations, load, grind and unload. Finished taps are ejected into a collection tray.
Why send your used drills out for resharpening? Keep the work in house to control quality and timely return of the resharpened drills. This is our used low cost semi-automated Winslow Model HC Drill Point Grinder. It is capable of grinding HSS and carbide drills in the size range of 1/6" - 1 1/2" (1.55mm - 38mm) diameter. It can grind Conventional, Helical, Split Point, Racon, and Bickford Points. The production rate is approximately 80 to 100 drills in the size range of 3/8"(10mm)/ hour for a Conventional or Helical point. Contact Winslow Engineering at schroeder@winsloweng.com or call 920-921-6404 www.winsloweng.com
Page updated
Google Sites
Report abuse