Drill Point Grinders

Model HC

Quick setup and changeover; extreme versatility; for lower drill quantities Cam-generated motion and rotation of the drill assures concentric drill points Manual profile, tracer-type dresser duplicates dresser cam form onto wheel Maximum hourly production rate 100 drills of 5/16" (8 mm) diameter Point angles: 60 to 160 degrees *Requires two operations to achieve geometry Grinding wheel: Horizontally mounted; 12" (305 mm) diameter Spindle power: 1 HP (.75 kW), 1800 RPM Floor space: 38" x 50" (.96 x 1.27 m) Weight: 1,000 lbs. (450 kg) 

Model HR

Quick setup and changeover for lower drill quantities; grinds Bickford Point in a single cycle Automatic infeed and cycle counter Cam-generated motion and rotation of the drill assures concentric drill points Manual profile, tracer-type dresser duplicates dresser cam form onto wheel Maximum hourly production rate 120 drills of 5/16" (8 mm) diameter Point angles: 60 to 160 degrees Drill point types and diameters ground *Requires two operations to achieve geometry Grinding wheel: Horizontally mounted; 12" (305 mm) diameter Spindle power: 1 HP (.75 kW), 1800 RPM Floor space: 46" x 44" (1.17 x 1.12 m) Weight: 2,000 lbs. (900 kg)

Model 100C

Drill Point Sharpeners

• High-quantity grinder; production is predictable with electronic "Pace Setter" control

• Cam-generated motion and rotation of the drill assures concentric drill points

• Automatic, self-compensating, tracer-type dresser duplicates dresser cam form onto wheel

Maximum hourly production rate: 450 drills of 5/16" (8 mm) diameter

Point angles: 90 to 140 degrees

Grinding wheel: Horizontally mounted; 20" (510 mm) diameter

Spindle power: 3 HP (2.25 kW), 1800 RPM

Floor space: 92" x 102" (2.34 x 2.59 m) plus coolant tank

Weight: 3,200 lbs. (1,450 kg)

Model 1000CC

Hopper-loaded machine for jobber-length drills Designed for new drill manufacture only Cam-generated motion and rotation of the drill assures concentric drill points Automatic, self-compensating, tracer-type dresser duplicates dresser cam form onto wheel Grinding wheel: Horizontally mounted; 20" (510 mm) diameter Spindle power: 3 HP (2.25 kW), 1800 RPM Floor space: 92" x 102" (2.34 x 2.59 m) Weight: 3,200 lbs. (1,450 kg)