Embedded Files
Winslow Engineering Servo Tool/Part Analyzer
This is our Model 560C Servo Driven Tool/Part Analyzer for automatically inspecting geometric features on cutting tools and parts. The inspection software used on the 560C is easy to program. Fixtures and parts can be attached to the top plate on the 560C for repetitive inspections. Inspection data can be down loaded to a spreadsheet for analysis. Please contact Winslow Engineering at schroeder@winsloweng.com or call 920-921-6404 for any questions that you may have. www.winsloweng.com
The "NEW" Winslow Engineering Robot AutoInspect Cutting Tool Inspection System was first shown to customers at Eastec 2019 in West Springfield, MA. The Robot AutoInspect Cutting Tool Inspection System was programmed to remove a finished ground endmill from a pallet, position it in front of our 560C Video Tool Analyzer where the end mills programmed geometric features were inspected. The 560C is able to automatically locate the endmills geometric features, do the preprogrammed inspections and store the inspection results. The end mill is then placed back in the pallet and the process is repeated with another endmill. You can set pallets of tools in front of the RobotCutting Tool Inspection System, go home for the evening, and come back in the morning to pallets of finished inspected tools.Â
The New Robot Auto Inspect
The New Robot Auto Inspect
Page updated
Google Sites
Report abuse